OBD2 OBDII Enclosure with OBD2 Male Plug for Car OBD2 GPS Tracker
|OBD2 male plug||standard|
|Pins of OBD2 male plug||copper, nickel-plated or gold-plated|
|Pins at the back||straight|
|Number of pins||16|
|Material of OBD2 male plug||PA66|
|Material of the OBD2 enclosure||ABS|
|Dimension of the OBD2 enclosure||50*48*26 mm|
|Surface treatment of the OBD2 enclosure||varnished, UV-coated|
|Cut-out||micro USB connector, SIM card slot, GSM indicator, OBD/GPS
|Contact Resistance||3 ohm max.|
|Insulation Resistance||5M ohm min.|
|Working Temperature||−25℃ ~ +100℃|
We made the plastic mold of the OBD2 OBDII enclosure and the OBD2
OBDII male plug by ourselves because we have a full set of machines
and equipments and an excellent team of staff for making plastic
molds. We also have injection molding machines which can
manufacture these OBD2 OBDII enclosures and the OBD2 OBDII male
plugs according to the mold.
The cut-outs are shown in the picture below.
This OBD2 OBDII enclosure is with snaps and press-fit style. Press
the top and the bottom of the OBD2 OBDII enclosure to make them
attach to each other.
Below is the dimension of the OBD2 OBDII enclosure.
This OBD2 OBDII enclosure can be used to assemble OBD2 GPS
trackers, telematics devices, M2M devices, IoV (Internet of
Vehicles) devices and fleet management devices.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel free
to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)