OBD2 OBDII Enclosure with 16 Pin J1962 OBD2 Male Plug Connector
|OBD2 male plug||standard|
|Pins of OBD2 male plug||copper, nickel-plated or gold-plated|
|Pins at the back||straight|
|Number of pins||16|
|Material of OBD2 male plug||PA66|
|Material of the OBD2 enclosure||ABS|
|Dimension of the OBD2 enclosure||72*46*26 mm|
|Surface treatment of the OBD2 enclosure||painting|
|Contact Resistance||3 ohm max.|
|Insulation Resistance||5M ohm min.|
|Working Temperature||−25℃ ~ +100℃|
We made the plastic mold of the OBD2 OBDII enclosure and the OBD2
OBDII male plug by ourselves because we have a full set of machines
and equipments and an excellent team of staff for making plastic
molds. We also have injection molding machines which can
manufacture these OBD2 OBDII enclosures and the OBD2 OBDII male
plugs according to the mold.
This OBD2 OBDII enclosure is with screws. Install the screws to
make the top and the bottom of the OBD2 OBDII enclosure attach to
There are 4 holes on this OBD2 OBDII enclosure. They are for heat
Below is the dimension of the OBD2 OBDII enclosure.
This OBD2 OBDII enclosure can be used to assemble ELM327 diagnostic
devices, OBD2 CAN programming tools, Nitro OBD2 tuning devices, ECU
tuning tools, car performance tuning tools, key programmers and
OBD2 window closers.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2
or J1708 cables, adapters or connectors in our website, feel free
to let us know what J1939, OBD2 or J1708 cables, adapters or
connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can
also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)